Purposes of educational programs of a bachelor degree of a specialty "Metallurgy" -

Purposes
of educational programs of a bachelor degree of a specialty “Metallurgy”
(«Metallurgy of ferrous metals and alloys», «Foundry production», «Metals
Science and Heat Treatment of Metals »);

specialty«Materials
Science and Technology of New Materials» («Composite materials»,
«Construction materials», «Nonmetallic materials») corresponds to the general
strategic directions of industrially – innovative development of the Central
region of Kazakhstan where the Karaganda State Technical University (KSTU), to
requirements of state standards (GOSO)and the purposes of graduation department
(table 1, Appendix A).

The
overall strategic targets of the educational program is concernedwith:

– provision ofindustry with qualified personnel corresponding
to modern requirements of society, science and engineering, in the field of
technology of production of new materials and products;

– integrationinto the international educational
space by harmonization of constantly update accredit educational program of the
higher and postgraduate technical education, with educational programs of
leading foreign technical universities that proved to be true a correspond
international rating;

– developmentof effectively operating mechanisms of interaction with
professional associations and communities on formation and updatingof the
educational program, independent quality assurance of formation and assignment
of correspond qualifications in directions of preparation of chair;

– formation of free, physically healthy, spiritually rich, moral
person promoting consolidation of the Kazakhstan society, professionally
demanded on the domestic and international labor markets, focus on training and
continuous long-life education..

Table 1 – Purposes of
educational programs of a bachelor degree

Content

Specialties5В070900 “Metallurgy” / 5В071000 «Materials Science and Technology of New Materials»

– provision
with basic knowledge on natural-science and physical and mathematical courses
on which the theory and technology of metallurgical processes of manufacture
of ferrous and nonferrous metals and alloys are based;

–
development of professional knowledge in the field of metallurgy of ferrous
and nonferrous metals and alloys, processing of metals by pressure,
metallurgical equipment and automation of metallurgical production;

–
development of scientific knowledge, practical experience and professional
skills in the field of creation of powereffective and the source saving
technologies of production, processing of technogenic raw materials and use
of secondary resources;

–
integration into the international educational space by harmonization of
educational programs of the higher and postgraduate technical education with
educational programs of leading foreign technical universities.

Educational
program «Metallurgy of ferrous metals and alloys»

– formation of
concepts about a current state and prospects of development of foundry
production: manufacturing techniques of casting molds, forming materials,
automation of ways of molding, melting of foundry alloys and the modern
melting equipment for production of foundry structural alloys from iron,
steel and nonferrous metals;

– development of research
skills and methodology for working out of modern ways of molding, an
estimation of quality of casting.

Educationalprogram «Foundryproduction»

–
development of comprehension about the basic objects, methods and principles
of the organization of thermal processing of ferrous and nonferrous metals in
technological repartitions of metallurgical production and mechanical
engineering, quality management of metal products;

– mastering
bases of technologies of thermal, thermomechanical processing at the
metallurgical and machine-building enterprises, by innovative ways ofion –
plasma surface processing of products;

–
development of research skills in the field of the thermal, chemico-thermal
and combined processing of materials;

– knowledge
of nanotechnologies and nanomaterials, modern methods of the structural
analysis, ways of mechanical tests of metals and alloys.

Educational program «Metals
Science and Heat Treatment of Metals»

– to know: about
principles of the CAD of machines and technological processes in mechanical
engineering;

– about principal types of
corrosion of metals and alloys and the basic methods of their protection;

– to know about: a current
state of structural crystallography and application of crystals and crystal
substances in engineering.

– scientific
principles of synthesis of alloys for developing materials in mechanical
engineering

Educationalprogram «Construction materials»

– to provide use of base
mathematical and natural-science knowledge in professional work;

– to know about
traditional and new technological processes, the equipment for reception of
nonmetallic materials;

– to own bases of methods
of the analysis, diagnostics and modeling of properties of nonmetallic
materials;

– to be able to analyze
the scientific and technicalinformation, to carry outnumerical and
experimental researches

Educationalprogram
«Nonmetallicmaterials»

Table 2 – Purposes of
educational programs of a master’s degree programon a specialty 6М070900 “Metallurgy”

educationalprogram

direction

generalcontent

additionalcontent

«Metallurgy of
ferrous metals and alloys»

The profile

(duration -1,5 year)

– study of professional terminology in the
Kazakh and foreign languages;

– the knowledge and use of methods of mathematical statistics
for planning experiment, the analysis of results and estimation of their
reliability;

– study of perspective metallic materials and
measures of their protection against corrosion;

– study of principles of technological management, audit and
marketing for the purpose of acceptance of administrative and technological
decisions;

– deepening
of professional knowledge in the field of heatexchange processes of
metallurgical production;

– statement
and decision of multifactorial problems of optimization of processes of
ferrous metallurgy;

the scientific and pedagogical

(duration – of 2
years)

– mastering
knowledge of physical and chemical essence of metallurgical processes;

– study of
tendencies of development of processes of metallurgy and requirements to
initial raw materials;

– deepening
of professional knowledge in the field of physical and chemical methods of
research of metal systems;

– study of
bases of pedagogics and techniques of teaching of technical disciplines

«Metals Science and Heat Treatment of Metals»

The profile

(duration -1,5 year)

– study of bases of thermodynamics of phase transformations;

– knowledge of physical and chemical bases of
production of alloys;

– study of modern technologies of heat
treatment of alloys;

– study of professional terminology in the Kazakh and foreign
languages;

– the knowledge and use of methods of mathematical statistics
for planning experiment, analysis of results and estimation of their
reliability;

– study of principles of technological management, audit and
marketing for the purpose of acceptance of administrative and technological
decisions;

– deepening
professional knowledge in the field of heatexchange processes of
metallurgical production (in particular, thermal shops)

– statement
and decision of multifactorial problems of optimization of processes of
ferrous metallurgy;

the scientific and pedagogical

(duration – of 2 years)

– study of
tendencies of development of processes of metallurgy and requirements to
initial raw materials;

– study of
bases of pedagogics and techniques of teaching of technical disciplines;

–
development of research and experimental skills of study of structure and
properties of metal alloys;

Conclusion:

1. Distinction of educational programs for
profile and scientific and pedagogical directions of a specialty
“Metallurgy” is defined by the purposes of training the experts.

2. In this connection, in an educational
program of a profile direction more attention is paid to study of management
and marketing, the industrial practice is introduced; in an educational
master’s degree program of scientific and pedagogical directionsuch disciplines
as pedagogics, methods of teaching of technical courses, pedagogical and
research expertsare introduced.

3. Distinction of educational programs
«Metallurgy of ferrous metals and alloys» and «Metals Science and Heat
Treatment of Metals» specialties of the master’s degree
program”Metallurgy” isdefined by specialization by the profile of a
specialty and the content of corresponding elective component of the block of
the basic courses.